PC USB InterfaceIR-USB01

IR-USB01 is an interface board to control parameters in user’s PC. Dedicated software to be provided.
  • Operating parameter setting
  • Motion Test
  • System initialization and Firmware update
  • Voltage, Load, Temperature, Present position
  •        monitoring
  • Operating parameter setting
  • Motion Test
  • System initialization and Firmware update
  • Voltage, Load, Temperature, Present position monitoring

Metal BracketIR-MB02(for 27mm stroke version only)

Use IR-MB02 metal bracket to mount the servo onto applications tightly. Referring to published drawings, user is also able to make this bracket at their end if necessary. This is for 27mm stroke version only as 41mm, 56mm stroke versions have built-in mounting holes on it.
Installation manual can be downloaded from our web(click).

Metal BracketIR-MB03(for 41mm, 56mm, 96mm stroke version only)

How to mount mightyZAP(41mm, 56mm, 96mm stroke version)
  • Using End bearing(IR-EB01)
  • Using Tap holes on servo motor case without brackets
  • Metal Barcket(IR-MB03 which is dedicated for 41mm, 56mm, 96mm Stroke Version)
.
Installation manual can be downloaded from our web(click).
.
IR-MB03 consists of 3 different type (A, B, C type) brackets as a set. Individual bracket A(IR-MB03-A), B(IR-MB03-B), C(IR-MB03-C) can be respectively purchased if necessory.

Arduino Servo Tester Shield (IR-STS01) for mightyZAP

Control servo motions without PC software. Built with Arduino Leonardo and our own servo shield, user controls servo motor using Arduino API & libraries.
[Attention!]]
Please do not supply power to IR-STS01 when it is placed on the un-insulated material such as a metal plate.
It causes serious damage on the product due to the short-circuit.

Raspberry Pi HAT (IR-STS02) for mightyZAP

IR-STS02 is a Raspberry Pi add-On board which is compatible with Raspberry Pi B3 or Raspberry Pi Zero.
With TTL/RS-485/PWM communication interface, power connector and GPIO pins, user is able to control mightyZAP on Raspberry Pie.
API and Library can be downloaded from our web(click).

End BearingIR-EB01

Mount mightyZAP on applications using this end-bearing for most optimal installation. Put it on the Rod-end(M3) and on the end of servo case (M2.5). Two end bearings (M3 and M2.5) to be packed in a set.
Set composition
  • M3.0 End Bearing(Silver) : 1ea
  • M2.5 End Bearing(Black) : 1ea
  • SPRING Washer : 2ea
Installation manual can be downloaded from our web(click).

Extension WireIR-EW01~04

We offer extension wires as below for application in your facilities.
IR-EW01 : 1,000mm length with / 3pins TTL/PWM
Molex connectors (50-37-5033)
IR-EW02 :  2,000mm length with/ 3pins TTL/PWM
Molex connectors (50-37-5033)
IR-EW03 : 2,000mm length with / 4pins RS-485
Molex connectors (51065-0400)
IR-EW04 : 4,000mm length with / 4pins RS-485
Molex connectors (51065-0400)